One main reason for choosing to remain with a stock system is because it comes already installed on your vehicle. You should know the difference between a dual exhaust and a dual exit exhaust system. But it is easy to mistake a dual exit exhaust for a dual exhaust system. The materials are often 304 stainless steel or aluminized steel. The stainless steel is usually coated in special metals that make it corrosion-resistant. This means there will be a reduction in the amount of load on the engine, leading to higher mpg and fuel efficiency.

Federal Catalytic Converters are not legal for sale, installation or use in the state of California. It should be noted that a split system will often provide an aggressive noise increase, and some designs will split the two pipes to opposite sides of the vehicle. If you are looking to save a little money but still get most of the benefits of a cat back exhaust system, however, aluminized steel may be the way to go. Made from traditional steel that’s been coated on all sides with aluminum-silicon alloy, these systems are very strong thanks to the metallurgical bond which still provides a level of corrosion resistance. While the aluminum coating reflects heat well, the steel can corrode if the aluminum layer is chipped or scraped off. Most cat-back systems will come in either an aluminized or stainless steel version.

Fine-tune your ride for the best performance and aesthetic today. Steeda offers the largest complete line of Ford-based parts and accessories for your build and is considered the largest privately owned Ford performance-based operation in the world. If you've been searching for the perfect place to purchase Ford automotive performance parts for your vehicle, then you're at the right place!

Not only do our products boost performance and optimize exhaust flow, but we also add a touch of personalization to your ride. Find the perfect performance exhaust system compatible with Ford, Ram, Chevy/GMC, Jeep, and more. Our patented design outflows all other exhausts on the market. The CORSA Performance GT350 Active valve exhaust system allows the driver to flexibility of having one exhaust that produces both an Xtreme and a Sport sound level.

Combined with our five different tip options, we've got you covered. We’ve had decades of experience perfecting exhaust style and technology and have developed custom exhaust systems considered too ‘niche’ by competitors. Many exhaust manufacturers use 400 series stainless steel to reduce costs and pad their profits. Additionally, the Maverick systems by Thermal offer a range of upgraded tip options that owners can choose from or change over time. Getting an upgraded cat-back exhaust system for your truck can enhance your performance and produce a great sound. Then there’s poor fitment and the dreaded drone that all too often accompanies aftermarket exhausts.

At Thermal R&D Performance, we have been developing quality aftermarket exhaust systems for decades. The materials we use are generally an upgrade from OE metals, and we incorporate our True Helmholtz Technology to eliminate cabin drone. This eliminates unwanted sound without restricting airflow needed for improved performance. Some three-way catalytic converter systems have air injection systems with the air injected between the first (NOx reduction) and second (HC and CO oxidation) stages of the converter. As in two-way converters, this injected air provides oxygen for the oxidation reactions.

These two work together to offer better flow and allow the system to breathe better. We are one of few brands that own our factory thus enabling us full control over the manufacturing process, selection of raw materials, and construction techniques. Install your IE catback without any permanent modifications or installation hassles. The installation process is straightforward and accomplished with standard mechanic tools.

Don’t deny yourself the perfect blend of sound and performance any longer. Give our team a call today for a cat-back exhaust system that will unleash the potential of your Maverick. I'm very pleased with this [Thermal R&D] exhaust on my Maverick. Loud enough to let the people around you know you have an exhaust but not so loud as to wake up your neighbors at 4 am. During cruising you can barely hear it inside but it wakes up when you step on it. Definitely not obnoxious but gives the truck a performance sound.

With over 66 years of breakthroughs and patents in high-performance gas and diesel engine development—including turbocharging and drivetrain, Banks has no rival. All Mishimoto products carry a Lifetime Warranty which includes accident protection. If you've installed any of our high quality products on your vehicle, please submit images of your ride/product to be featured on our social media accounts. Whether it’s wowing people at a show or getting every advantage over the competition on the track, our exhaust systems will help your car perform its best. They are usually the last systems to get addressed by performance drivers, who put a majority of work into turbo systems or custom tunes.

Typically, that includes a mid-pipe, muffler, tailpipe and tips. Cat-backs generally yield increases in performance, due to the more efficient flow of exhaust through upgraded parts like larger diameter tubing and better flowing mufflers, as well as improved sound and reduced weight. For starters, the "cat" in catback exhaust system is short for "catalytic converter", a central part of your car’s emission control system, which cat back exhausts are fitted behind, hence the "back". This relatively simple mod helps to free up exhaust gas flow and improve the noise of your engine by swapping out part of your exhaust system with a specially designed car performance exhaust system. These three reactions occur most efficiently when the catalytic converter receives exhaust from an engine running slightly above the stoichiometric point. For gasoline combustion, this ratio is between 14.6 and 14.8 parts air to one part fuel, by weight.

The team at Sandgate Auto Electrics are well-versed in all things automotive which has led to them becoming the go-to for car lovers in the northern suburbs of Brisbane, South East Queensland. As a family owned and run company, who are local residents themselves, we have gotten to know their loyal clientele and love helping them with the repairs and modifications. Each "receiving" 50mm pipe is crushed in half, squeezed next to the other and welded to the 60mm "feed" pipe. We hope you enjoyed this lighter take from 27WON and find the information helpful the next time you shop for an exhaust system.

Take up to $150 off gas truck exhaust and up to $75 off diesel truck exhaust and components starting July 1st, 2024 – for a limited time only. Evidently, a cat back exhaust system has many benefits all while being a quick, easy, and affordable solution that will transform your car. If you have any questions about what a cat back exhaust system can do for you, don’t hesitate to contact us at Loper’s Performance Center.

Different exhaust systems offer different noise levels and tones, but how? Sound quality and overall loudness of an exhaust system can vary significantly depending on the pipe diameter, size and design of the muffler, resonator inclusion, and the number of outlets. For this reason, all systems sold on RealTruck are filtered by noise level, including loud, moderate, and quiet. From the factory, most manufacturers employ small-diameter piping, restrictive mufflers, and noise-reducing resonators, significantly smothering exhaust flow and sound quality. A front pipe back system replaces a few key components of the OEM Honda or Acura exhaust found on your EX, Touring, Si, or A-Spec that are after the Front Pipe (the pipe that goes under the engine).

Each cat-back exhaust system is made from high quality components and assembly so you can get the performance you want at a price you can afford with the assurance you need. Please note Quad Tips are available with optional Carbon RR Racing Tips! (see photo of our new tips in the image library for this product)This is our signature full cat-back exhaust system for Lexus ISF.

The precious metals inside the converter, including platinum, palladium, and rhodium, are extracted. Ford Motor Company and Shelby American collaborated to create a stunning high performance concept vehicle based on the exciting and innovative Ford Mustang Mach-E GT platform. The big block Shelby Cobra is considered by many to be the most iconic American sports car in history. When GM began to work on a new big block c3 corvette long tube headers and Ferrari increased the power of the V12 powered GTO's, Shelby and Ford Motor Company decided to shoehorn the mighty 427 FE motor into the Cobra. By combining Ford's incredible 6.7-liter Power Stroke® turbo diesel churning out 1,050 lb.-ft. Of torque with a Shelby tuned advanced off-road suspension system, the three-quarter ton truck delivers both serious off-road capabilities with best-in-class towing.

Stock exhaust systems do not give the deep and aggressive growl most motor enthusiasts desire. Let everyone hear you coming with an aftermarket cat-back exhaust on your Chevrolet Camaro. Your Chevrolet Camaro stock exhaust is pretty good, but its just not enough. No matter if you drive a Camaro V6, Camaro LT1 or Camaro SS Phastek has the best exhaust option for your ride! If you can't decide between an axle-back or a cat-back, checkout our blog to help you decide.

There are loads of options, all offering different benefits, and the amount of research you do can quickly turn to frustration when you realise the minuscule differences between the many options. OE-quality exhaust products engineered for today's medium-duty and heavy-duty vehicles. The single 60mm is split into twin 50mm pipes to the twin silencers.

#19680 includes all the hardware necessary for do-it-yourself installation. Extensive testing on our in-house dyno has been used to ensure this SPEQ Series truck exhaust system not only sounds impressive but also has the performance bite to match its newfound bark. Consent to receive text messages for these purposes is not a condition of any purchase, service, or sweepstakes entry. So, if you are okay with the sound and performance then you have no need to replace your original exhaust system. OEM exhaust systems on the other and have crush-bent tubing made of normal steel.

I do live in a residential community and want to keep things civil with my neighbors...so I went with the resonated/muffled setup. Orders of $299.99 or more ship free within the continental U.S.Shipping to Alaska and Hawaii is additional and not included.We do not ship international at this time. Enter your email address above, to be notified of new products released. Sign up to our newsletter and stay up to date on all the latest news, products and events.

A cat back exhaust system is one of the most popular aftermarket upgrades for performance-minded drivers. When deciding which type of exhaust system to choose, it is important to consider your needs and budget. If you are looking for maximum power and efficiency, a cat back exhaust may be the best option. However, if you are more concerned with cost and weight, a standard system may be a better choice. A cat back exhaust is one of the most popular upgrades for car enthusiasts.

At Euro Car Parts, we have exhaust parts to help you do just that. It is important to note that the fuel saving will be more noticeable when traveling at freeway speeds than city driving, but if you spend a lot of your day on the road, you’ll likely notice the difference. View our technical tips to help you install, learn about and maintain your exhaust system the right way.

Automotive Performance Systems Inc. (APS) and its NEUSPEED®‚ and Neumann Distributing divisions are your number one source for aftermarket import performance products! We carry a large inventory of all the parts featured in our catalog and on our website. Our customer service is unrivaled, with the most knowledgeable support team in the industry. All aFe exhaust systems are engineered and manufactured in our Corona, California facility. The price of a cat back exhaust system can vary widely depending on the make and model of your vehicle, the materials used, and the complexity of the design.

There are several factors to consider when selecting an exhaust system for your vehicle, including noise level, finish, price, style, and installation difficulty. As you move through the versions here, you’ll notice that the more complete the system, the more expensive it becomes. In exchange, you'll get more performance and sound benefit out of the system. To sweeten the pot, our exhausts come with significant savings once you start bundling multiple pieces together.

That means a full exhaust system is a one-way ticket to overtaking cars on the road with ease, fewer trips to the gas station and more power behind your acceleration for when you need it the most. Discover the true power a high-performance exhaust system can bring to your truck or car with CORSA PERFORMANCE. CORSA has remained a leader in aftermarket performance exhaust systems through advanced engineering and constant innovation for over 25 years. Each CORSA exhaust utilizes our patented Reflective Sound Cancellation® (RSC®) Technology and top-of-the-line materials for a truly aggressive sound without any annoying drone during cruise. Enhance your driving experience and see what sets us apart from the competition with a CORSA axle-back or cat-back exhaust system today. Adding a cat back exhaust system is a great way to increase horsepower and improve sound for your vehicle.

The remaining waves produce the deepened and enriched exhaust acoustics you love. Stillen offers a variety of exhaust systems for many vehicles, both foreign and domestic. The muffler is a glass filled, large chamber design that provides the optimal amount of exhaust velocity for the engine while producing a great low rumble sound - without any annoying buzzing, "racer" sound. The high clearance fitment dramatically reduces the risk of getting hung-up on obstacles when off-roading. We’ve been helping customers with performance upgrades since 2006, and have a staff full of people who can help answer your questions. Our customer service — from our low prices to our fast shipping — has earned us a reputation with a legion of fans.

Our straight-through brushed-finished mufflers are configurable to your desire, smoothing the exhaust note to a deep growl, without adding restrictions, rasp or drone. Strong high-quality bracketry and OEM-style clamps hold the system steadily in place, making the install or removal a snap, and fitment simple, yet precise. A cast 3" to dual 2.5" rear splitter creates an ultra-smooth transition, steadily feeding exhaust gasses out of the system, while looking tidy from under the rear bumper. Finally, removable 4" polished slash-cut exhaust tips finish the system, adding a classy motorsport-inspired touch to the rear of the vehicle. In addition to high-quality materials and components, the design of each high-performance exhaust system allows for easy, bolt-on installation right out of the box. CORSA exhausts require no welding and can mount directly to your factory connections.

When used in the context of aftermarket parts or performance upgrades, "cat-back" is used to indicate which section of the exhaust system the parts replace. Cat-back systems are available as both single- and dual-exhaust. All Thermal R&D exhausts are built right here in the USA out of the highest quality materials. Depending on these variables, installing a less restrictive exhaust on your Maverick can improve horsepower by about three to five percent. At Thermal R&D Performance, we have been producing and perfecting aftermarket exhausts for decades.

Another difference is with the material used in the cat-back exhaust system against that in stock exhaust systems. But the problem with a resonator is that it can cause restriction to the flow of the exhausts. In the end, this can end up lowering your vehicle’s performance. It is also more affordable and easier to install than other types of exhaust systems, including the cat-back exhaust system. Cat-back and axle-back exhaust systems are both aftermarket exhaust systems. A performance exhaust system, like the cat-back exhaust, allows for easy splitting into dual exhaust.

Although phosphorus is no longer used in gasoline, it (and zinc, another low-level catalyst contaminant) was widely used in engine oil antiwear additives such as zinc dithiophosphate (ZDDP). Beginning in 2004, a limit of phosphorus concentration in engine oils was adopted in the API SM and ILSAC GF-4 specifications. Although catalytic converters are most commonly applied to exhaust systems in automobiles, they are also used on electrical generators, forklifts, mining equipment, trucks, buses, locomotives, motorcycles, and on ships. They are even used on some wood stoves to control emissions.[5] This is usually in response to government regulation, either through environmental regulation or through health and safety regulations. Custom setups, especially for vehicles that do a lot of off-roading are also available.

All of our products are made in the UK and distributed to more than 90 countries worldwide, making Milltek Sport one of the most accessible performance aftermarket brands on the market. Our catback design includes all sections to replace the factory exhaust tips, mufflers, and resonator up to the midpipes. Enjoy an unrestricted system that delivers the perfect exhaust note from your turbocharged V6 engine. A catback exhaust system replaces the muffler and tailpipe with a more free-flowing design. This allows the exhaust gases to flow more easily out of the engine, which can improve the sound and performance of the vehicle.

In layman’s terms, a catback exhaust system provides a smoother, more streamlined path for exhaust gases to exit your car, allowing your engine to work more efficiently. When catalytic converters were first introduced, most vehicles used carburetors that provided a relatively rich air-fuel ratio. Oxygen (O2) levels in the exhaust stream were therefore generally insufficient for the catalytic reaction to occur efficiently.

Finally, the catalytic converter can become fouled over time, resulting in a loss of power. This can be remedied by having the converter cleaned or replaced as needed. When it comes to choosing the right cat back for your car, there are a few things you need to keep in mind. First, you need to make sure that the cat back you choose is compatible with your car's make and model. Are you an aggressive driver who likes to take corners at high speeds?

This quality material will ensure that your Cat-Back system will last through any harsh conditions. A cat back exhaust system is a form of car exhaust that includes the catalytic converter. This type of system is often used by those who want to improve their car's performance, as it can help to increase power and efficiency.

Your Charger will definitely grab people’s attention each time you accelerate. However, to feel the benefits of this upgrade, you need to install a Dodge Charger cat back exhaust kit that fits your vehicle’s specifications. Thankfully, AmericanMuscle carries a variety of cat back exhaust systems that match your Dodge Charger’s configuration and your driving lifestyle. We’re also dedicated to providing the best products in the market, so all of the items we have are made by trusted automotive brands.

All joints are hand TIG welded using precise fixtures and tooling. We take great pride in knowing your new exhaust will sound remarkable and stand the test of time. Stand out from the crowd with oversized 90mm quad slash-cut exhaust tips. These aggressive-looking tips fill the factory exhaust cutouts for that high-end sporty look. Over 20 years of expertise have cemented TruBendz's reputation for excellence. Our commitment to high-quality materials and craftsmanship ensures that you get the best bang for your buck.

CORSA exhaust parts, hardware and detailed instructions are included in each 2007 duramax delete kit so you can get on the road as fast as possible. We hope this article has provided a thorough answer to the question of what is a catback exhaust and provided advice on how they can help improve the performance of your car. While they may not provide a big performance boost for all cars, cat-back exhausts are a simple and effective way to improve gas flow in your exhaust system beyond what stock exhausts are capable of. Catalyst poisoning occurs when the catalytic converter is exposed to exhaust containing substances that coat the working surfaces, so that they cannot contact and react with the exhaust. The most notable contaminant is lead, so vehicles equipped with catalytic converters can run only on unleaded fuel.

Decades later, Gale and the team are not only innovating, patenting products, and setting the bar for aftermarket performance manufacturers, we're also sharing our secrets with the world. The 6.2-liter LS3 V8 was factory rated at 415 horsepower and 415 lb-ft of torque. It is used to expel harmful gases and substances from your engine; without it, the car could experience a build-up of fumes.

These look like standard mufflers with a VERY unusual side entry rear exit configuration. Notice the heat discoloration at the intersection where the split occurs.Heat discoloration shows up where there is a flow restriction. Notice also the heat discoloration just after the pipes enter the silencers. It is AMAZING the engine makes the power it does through this congestion. Features Only 10 lbs [catless and non resonated version] 304 stainless steel piping Smooth air flow for maximum horsepower Compatible with both manual and automatic transmissions TIG welded to perfection... The main functions of exhaust systems are increasing horsepower and improving your engine sound.

Video Features Options Short video of our 3" Catback Exhaust for the 07+ Honda Civic Si Sedan. Note that this was installed on a naturally aspirated setup (stock header and... Already own an Ultimate Racing Performance Muffler and want to upgrade to a full Catback system. For information about our other auto repair services, please refer to our comprehensive guide. But both cons of a resonator are not present with a cat-back exhaust system. For the noises that the muffler fails to get rid of, the resonator eliminates them. As a result, they are fitted with both a muffler and a resonator.

A stock system is designed to reduce and if possible eliminate all the noise produced by your vehicle. Because of this, the axle-back exhaust system does not impact the flow or pressure of the exhaust gases in any way. The axle-back exhaust system uses the factory exhaust pipe which does not have a large diameter. This offers even more breathing space for the engine thus better performance. Most cat-back exhaust systems are customized and not universal. One is to replace specific parts like with cat-back exhaust systems.

Catback exhaust systems are popular among car enthusiasts because they can improve the sound and performance of a vehicle. From classic American muscle cars to the newest off-road capable rigs, STILLEN has you covered. Browse our most popular performance car, truck and SUV exhaust systems to find the ultimate exhaust experience for your vehicle. If you’re looking to enhance the performance of your car, you may have heard the term "cat back exhaust" being thrown around and wondered what is a catback exhaust exactly.

Everything you love about our MK7 Golf range has been re-engineered to suit MK7.5. Enjoy an unparalleled experience, power and sound output coupled with a seamless fit. Trucks are all about dependability and capability, which is why MagnaFlow engineers every one of our durable, corrosion resistant stainless-steel exhausts to last the lifetime of your vehicle. One of the things you would appreciate about the axle-back exhaust system is that it offers better sound improvement.

This is achieved by burning off the excess hydrocarbons which result from the extra-rich mixture required for a cold start. Slightly lean of stoichiometric, the exhaust gases from the engine contain excess oxygen, the production of NOx by the engine increases, and the efficiency of the catalyst at reducing NOx falls off rapidly. However, the conversion of HC and CO is very efficient due to the available oxygen, oxidizing to H2O and CO2. However, the efficiency of the catalyst at reducing NOx is good, and the production of NOx by the engine decreases.

In this article, we’ll explain what a catback exhaust system is, what it does, and why it’s different from your run-of-the-mill exhaust systems. There are seemingly endless available upgrades when looking to enhance vehicle performance. It certainly rings true when it comes to your vehicle’s exhaust system. One term that you’ve probably heard if you’re in the market for an aftermarket exhaust upgrades is cat-back exhaust. What exactly does it mean, and how does it change the way your vehicle performs? This 2009 Pontiac G8 GXP is one of approximately 1,830 examples produced, and it has 16k miles.

The difference is that the dual exhaust system has two exhaust systems on one vehicle. Meaning, when modifying your exhaust, never start from the front of your turbocharged vehicle with a downpipe or with headers on your naturally-aspirated platform, you will create a bottleneck in the flow. By starting with a cat-back first, your exhaust gases will flow more freely if the rest of your system is stock.

Because the success of a catback exhaust system depends on various factors – like catalytic converter restrictions, engine power, etc. – there’s no easy way to calculate how much horsepower you stand to gain. If you have a restrictive exhaust, then a cat back exhaust could massively improve your car’s performance, and contrastingly, if your exhaust already flows well, then a cat-back won’t be much of an upgrade. In Colorado, it is illegal to select a catalytic converter for installation based solely on vehicle weight and engine size. Converters in this catalog are based on Executive Orders issued by the California Air Resource Board and must be used in accordance with this information.

The time and money you spend are a big investment, and we want to help you make the best decision for your driving dreams. Typically, a cat-back exhaust system will increase your car’s horsepower by somewhere between 5 and 50 brake horsepower. This will vary greatly depending on the condition of your exhaust and engine, so you should ask your mechanic if getting a cat-back exhaust is the best way to improve the performance of your car.

If you have modified your 4×4 with lifted, lowered, or air type suspension systems, you can opt for a specially designed cat-back system with more pipe curvature before the rear axle. This is necessary for off-roading as it allows a higher degree of wheel travel and greater clearance for reduced-height springs and airbag suspensions. The custom exhaust systems available let you pick from a selection of pipework that allows you to adjust the exhaust to suit your noise preference. Are you looking to boost the power and efficiency of your vehicle?

Shelby American is proud to announce the latest generation Shelby Ford F-150 Raptor, the most polished off-road truck ever we have offered. Add more products to wishlist by simply getting registered on Eurocarparts. One of the most important elements of your car, your exhaust is vital for preventing harmful gases from being released into your surroundings. When you notice damage or wear and tear, it's essential to fix them quickly.

Invidia offers products known for their outstanding quality, and each finished piece is a work of art that sets them apart from the competition. For anyone looking to take their vehicle to the next level, Invidia is a name to remember. So, a cat back is used to indicate an upgrade to the stock exhaust system. And anyone looking to improve their ride should strongly consider a cat back exhaust system. This pipe will connect your mk1 downpipe that we sell for  1.8t, vr6, or aba 2.0, to the catback exhaust system. Therefore you need to check with your local state laws for legality.

This style of clamp design is popular in high-end OE applications and is known for long-term reliability. You can change the look of your Jeep too, with everything from polished stainless steel to full black exhaust kits, you can pick just the right look for your jeep. Depending on the year of your Jeep you might even be able to get a single or dual exit exhaust. You can choose your favorite exhaust system from our three collections, the GRiP Exhaust, N-II Exhaust, or the DT-S Exhaust.

Most end up reducing performance and adding weight, or worse yet – adding cost and doing nothing at all. Find out more about this topic by reading our blog on Why Exhaust Drone Silencers Aren’t All They’re Cracked Up To Be. RealTruck is your home for the best products to outfit your build for unforgettable adventures.

Installation was super easy, and did it myself with only ramps. When IE claims 'no-drone' they really mean it - the sound is perfect! The youtube videos do not do a good job capturing the sound quality, but trust me, it's the best overall setup for your car at a reasonable price point. Enjoy a tuned and enjoyable exhaust note without any raspy leaks ruining the show. Our exhaust system assembles with our wide-width stretch clamps designed to seal and pull your exhaust connections together.

But with so many options available, it's easy to get lost in the world of aftermarket exhaust systems. While some companies may try to lure customers with an attractive price tag or flashy branding, it's quality of performance, sound, and construction that truly sets a great brand like Invidia apart from the rest. Transform your vehicle with the Roush Performance F-150 Cat-back Exhaust System, an ideal replacement for your factory exhaust system. Crafted from robust, corrosion-resistant T-304 stainless steel, this system features high-flow mandrel bends to enhance exhaust flow efficiency. Experience the thrill of enhanced acoustics and performance with this premium upgrade for your F-150. Banks patented exhaust systems enhance power, fuel economy, and sound by removing all airflow restrictions.

You get the only the best with SPD's 3" resonator 2008 f350 egr delete kit pipes. These aluminized steel pipes are 3" .. SPD's high performance resonator cat-back pipe replaces your factory resonator pipe with a true 3" p.. The welds and craftsmanship are top notch, and the tips look perfect.

Featuring virtually indestructible 100% stainless steel, our patented TorqueTube headers maximize exhaust extraction to haul you up the grade. This Takeda cat-back exhaust system by aFe POWER delivers superior performance, quality, and good looks. By replacing the rear section of your exhaust with a quality cat-back car performance exhaust system, you can reduce the backpressure and allow your engine to cycle with more speed and efficiency. Thanks to their larger diameter pipes and high-quality mandrel bends, a good cat-back exhaust system will increase the efficiency of your car’s exhaust system, and with increased efficiency comes increased power. The exhaust system in your car directs fumes away from yourself and your passengers, improves engine performance and fuel consumption, and controls cabin noise.

Explore renowned manufacturers such as Borla, Invidia, and HKS, known for their exceptional craftsmanship and exhaust system expertise. FTSpeed's cat back exhausts are designed to perfectly fit your sports car, delivering noticeable gains in both power and aesthetics. Elevate your vehicle's performance and sound with our premium cat back exhaust systems. Cat-back exhaust systems typically feature a muffler, and sometimes not, and these will have piping that will route to your catalytic converter. The piping will have larger bends that are as straight as possible to provide an unobstructed exit path for the exhaust gases.

Exhaust systems are integral to your ride’s performance; these amalgamations of piping, mufflers, and resonators carry exhaust gasses from your vehicle’s exhaust manifolds to the tailpipe. Dual muffler section upgrade designed to bolt up to the OEM midpipe   Features Bolts on to factory midpipe! 3-inch 304 stainless steel piping Dual high-flow mufflers with straight through... Reducing back pressure is the key to improving performance with a cat-back exhaust system. By allowing exhaust gases to exit the engine and flow through the system more freely, the engine runs more efficiently. This efficiency can translate to better throttle response, increased horsepower, and even improved fuel economy in some cases.

You can also add other upgrades to give your Charger an extra performance boost. Visit the AmericanMuscle headers and exhaust accessories pages to find parts that fit your new cat back system. Mishimoto offers a wide selection of exhaust systems, including cat-back exhausts, performance exhaust systems, and aftermarket exhaust options, designed to enhance your vehicle's performance, sound, and style. Our exhaust systems are engineered with precision and constructed using high-quality materials to deliver improved exhaust flow, increased horsepower, and an enhanced driving experience. Enhance the sound and performance of your Subaru with our premium cat back exhaust systems. Designed to replace the factory exhaust system from the catalytic converter rearward, these cat back exhausts offer a deeper, more aggressive exhaust note while reducing restriction for improved airflow.

Noticeable gains will be noticed in the initial throttle response, with reduced turbo lag. Engine movement and exhaust weight are transferred into the exhaust hangers, which puts a lot of stress on the mount brackets. IE's catback system is manufactured with multi-point and boxed-in hanger mounts designed to stand the test of time. Drive confidently knowing your exhaust is securely mounted and protected against annoying rattles or breaks. All piping is constructed of mandrel-bent T304L stainless steel to offer superior corrosion resistance.

The performance parts available at Steeda include lowering springs, wheel spacers, spark plugs, brake kits, and many more. Choose from our Ford automotive parts today so that you can keep your ride in great condition. When it comes to picking a cat back exhaust system, you will likely be choosing between stainless or aluminized steel. The majority of the performance systems are made from stainless steel which is favoured as they won’t oxidize and corrode over time like traditional steel can.

If you've got questions about cat-back exhaust systems, pipe diameters, muffler type, or anything else, talk with our product specialists. All 1995 model year vehicles, and all 1992 model year or earlier vehicles. All model year vehicles that were manufactured with EPA or Federal emissions certification. Exhaust gases from the cylinders are collected in the exhaust system to prevent harmful fumes from entering the vehicle.

In California, it is illegal to select a catalytic converter for installation based solely on vehicle weight and engine size. The design of these systems often sees an increase in horsepower compared to the factory design of a vehicle. Because stock models try to minimise materials and maximise space, with horsepower as a lower priority.

In addition, a cat-back exhaust can also improve your car's fuel economy. So, if you're looking for a way to get more out of your car, a cat-back exhaust is a great option. We now offer Maverick cat-back exhausts in both all-wheel drive (AWD) and front-wheel drive (FWD) configurations.

As a result, our popularity has increased, and we work tirelessly to maintain our quality systems while fulfilling orders. Please be aware that while we typically exceed our estimated wait times, we have been successfully operating for three years and no customer has ever been left without their system, or a cancellation/refund. At Rae, we are expanding our team and investing in additional resources and machines to ensure we stay at the forefront of innovation. With our ambitious plans, we are on track to meet demand and increase our inventory of premium parts by the end of the year. Please note that purchasing this product is agreeing to understand this concept. Amplify your vehicle's performance and sound with Full-Race's premium Exhaust systems - reliable power and efficiency harmonize with a brand that’s trusted for quality and performance.

All are capable of delivering a race-inspired exhaust note along with more power and torque. And this is why cat-back exhaust systems are considered to be one of the best performance modifications that are rewarding in power and sound and are highly effective for all driving purposes. Aside from maximizing your sound gains, the RSC® technology in every CORSA high-performance exhaust allows for a completely free-flowing air path to optimize your performance with every drive.

The tech commented on the high quality of the exhaust and how well it fit. With the deepest and winningest racing heritage in the business, we have credibility thatwas earned one quarter mile at a time. Our friendly staff is experienced through product testing, research and development,and track competition.

This modification includes the pipes, muffler, and sometimes the resonator. The term "cat-back" itself signifies that everything behind the vehicle’s catalytic converter is being upgraded or replaced. Milltek's Sport Catback Exhaust Systems are designed to compensate for the sound reducing qualities from the particulate filter and significantly improve the sound aesthetic of the exhaust system.

Follow us on Facebook, Instagram, YouTube and Twitter to stay up to date on our latest products, projects, and adventures. Join the conversation and show off your ride with #MagnaFlow for a chance to be featured. Overall, cat back systems are relatively low-maintenance and easy to keep in good working order. There are a few common problems that can occur with cat back systems, but fortunately, they are relatively easy to fix.

All performance exhaust systems are designed with you in mind, and we cater to an ever-expanding range of vehicles. Milltek believes in continuous evolution, and their research & development team work throughout the year to deliver the most in demand solutions to all your performance exhaust requirements. All products are made in the UK and distributed to more than 90 countries worldwide, making Milltek Sport one of the most accessible performance aftermarket brands on the market. If you're looking to customize your vehicle's exhaust system, Mishimoto also offers a range of aftermarket exhaust options. These exhaust systems are designed for specific vehicle models and provide a combination of performance, sound, and visual enhancements.

And a lot of people think that gearheads mess with it just to make our cars sound louder. Another problem is that the gaskets and seals can degrade over time, resulting in leaks. These leaks can usually be fixed by replacing the relevant seals and gaskets.

It typically includes a rear pipe, resonator, and muffler that all attach after the last catalytic converter. The turbo-back system is the most complete system you can buy. It replaces all of the components that the previous two systems that we’ve talked about and also upgrades the downpipe. The downpipe is the first piece of exhaust piping that comes after the turbocharger and it also houses the catalytic converters on all L15 powered 1.5T Civics and Integras. From a sound and performance perspective, you’re going to get the most of both compared to the other two versions mentioned before.

We develop solutions to common issues that still trip up our competitors. For instance, we recently upgraded our Ford Maverick exhaust system offerings to include AWD and FWD configurations. President and founder, Gale Banks, began at age 14 with an engine teardown of his mother's '31 Ford Model A that resulted in an increase of 65 hp for a total of 105 hp.

Shopping for exhaust can be intimidating, from figuring out your end goal -- sound or power increase -- to determining the exhaust type you need to achieve it. In this article, we'll focus on cat-back exhaust and explain what it means, what's included, and why you'd want it for your truck. All 2000 model year and earlier vehicles or any model year vehicle that was manufactured with EPA or Federal emissions non 50-State certification. All 2001 model year and newer vehicles that were manufactured with California or 50-State emissions certification. Our ASE Certified technicians are the best when it comes to the installation of Banks performance products. The 19″ Y-spoke alloy wheels were sourced from a Cadillac CTS-V and are mounted with Continental ExtremeContact tires.

Exhaust systems also play a role in reducing noise levels, improving engine performance and reducing fuel consumption. To get the power level up to 785 hp, Shelby installs a Ford Performance supercharger, as well as a new carbon-fiber air intake tube, high-performance fuel injectors, and an aluminum heat exchanger. A Borla (cat-back) exhaust system rounds out the list of powertrain modifications.

Our exhaust system uses larger piping compared to the factory exhaust system, yet weights 5 lbs. The factory system uses 2.56" piping, which reduces to 2.36" before splitting, greatly diminishing the overall diameter of the system. Finally, our system’s 4" exhaust tips dwarf the factory 3.15" tips, giving the rear of the vehicle a sportier look. Beautifully hand-crafted T304-stainless-steel components adorn the system with stunning TIG-welding throughout.

It is important to note, however, that going too large may cause a dip in performance when gases pile up and exit the system slower resulting in torque, rpm, and horsepower loss. After the emissions are channeled out from the cylinders by the exhaust manifold, they are deposited into different catalytic converters. The IE Catback Exhaust System for your Audi B9/B9.5 S4 incorporates our in-house engineered DroneTrap technology to deliver a truly aggressive exhaust note without any annoying drone or rasp. Engineered with cutting-edge design features, including mandrel-bent stainless steel, TIG welding, multi-point reinforcements, and oversized quad tips. A catback exhaust system is a type of aftermarket exhaust system that replaces the muffler and tailpipe of a vehicle. It is called a "catback" system because it starts at the catalytic converter, which is located in the middle of the...